ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Convertible|Page 8268 > < Daytime Running Lamp Control Unit|SOHC|Page 8263
Page 1
background image

Dome Lamp: Description and Operation
Convertible

NOTE:  Power to all interior lamps is provided through fuse junction panel Fuse 8 (10A) which is hot at all times. Ground to all of the interior lamps is
provided through Circuit 57 (BK). 

The dome lamp system consists of the following: 

-

Dome lamp switch (part of headlamp switch)

-

Lamp switches

-

Optional remote keyless entry module 

-

Dome/map combination interior lamp

-

Circuit wiring and circuit protection

The convertible uses two miniature bulbs located in the base of the inside rear view mirror.

Power to the dome lamp portion of the dome/map combination interior lamp is provided through Circuit 53 (BK/LB) by turning on the dome lamp
switch in the headlamp switch or by one of the courtesy lamp switches in the A-pillar with the front door open.

On the convertible, the map lamp switches must be in the OFF position for the dome lamps to work with the dome lamp switch or lamp switches.

The map lamp system consists of:

-

Dome/map combination interior lamp.

-

Circuit wiring and circuit protection.

Power is provided to the map lamps through Circuit 54 (LG/Y). The map lamps are turned on by switches on the dome/map combination interior lamp.

Convertible|Page 8268 > < Daytime Running Lamp Control Unit|SOHC|Page 8263