Mustang GT V8-4.6L SOHC VIN X (1998)
Power Steering Line/Hose: Service and Repair
Seal Replacement - Quick Connect Power Steering Fitting
If a leak occurs between the tubing and tube nut replace the hose assembly. If a leak occurs between the tube nut and the pump outlet, replace the seal.
The following procedure should be used:
1. Check fitting to determine whether leak is between tube and tube nut or between tube nut and pump outlet.
2. If leak is between tube nut and pump outlet, check to make sure nut is tightened to 34-46 Nm (25-33 ft. lbs.).
CAUTION: DO NOT overtighten. The casting may crack.
3. If leak continues or if leak is between tube and tube nut, remove line.
