ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Multiplex Communication Network <--> [Information Bus] > < Idle Speed/Throttle Actuator - Electronic|Specifications|Page 3278

Mustang GT V8-4.6L SOHC VIN X (1998)

Page 1
background image

Idle Speed/Throttle Actuator - Electronic: Service and Repair

Idle Air Control (IAC) Valve

REMOVAL 

1. Disconnect battery ground cable.
2. Disconnect fuel charging wiring from Idle Air Control valve (IAC valve).
3. Remove the two idle air control valve retaining bolts.
4. Remove idle air control valve and idle air control valve gasket.

INSTALLATION 

1. Clean idle air control valve gasket mating surfaces.

NOTE:  If scraping is necessary, do not damage air control valve gasket surfaces or drop gasket material into engine.

2. Follow removal procedure in reverse order.
3. Tighten retaining bolts to 8-12 Nm (71-106 lb-in).

Multiplex Communication Network <--> [Information Bus] > < Idle Speed/Throttle Actuator - Electronic|Specifications|Page 3278