Mustang GT V8-4.6L SOHC VIN X (1998)
Multiplex Communication Network: Initial Inspection and Diagnostic Overview
Inspection and Verification
1. Verify the customer's original concern.
2. Inspect to determine if one of the following electrical concerns apply:
VISUAL INSPECTION CHART
Electrical
^
Check electrical connections for obvious damage, opens or shorts.
3. Inspect the pins on the Data Link Connector (DLC) for loose, bent, deformed, corroded or broken pins. If pin is damaged, repair or replace pin,
verify communication with New Generation STAR Tester 418-F048 (007-00500) or equivalent.
4. If the concern(s) remains after the inspection, continue with See: Scan Tool Testing and Procedures
