Mustang GT V8-4.6L SOHC VIN X (1998)
Throttle Position Sensor: Service and Repair
Throttle Position Sensor - 4.6L (2V)
REMOVAL
1. Disconnect battery ground cable.
2. Disconnect fuel charging wiring from Throttle Position sensor (TP sensor).
3. Remove two throttle position sensor retaining screws.
4. Remove throttle position sensor.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten retaining screws to 2.8-3.8 Nm (25-33 lb-in).
