Mustang GT V8-4.6L SOHC VIN X (1998)
EGR Electronic Vacuum Regulator Solenoid: Service and Repair
REMOVAL
1. Disconnect fuel charging wiring from EGR vacuum regulator solenoid.
2. Disconnect main emission vacuum control connector from EGR vacuum regulator solenoid.
3. Remove nuts and EGR vacuum regulator solenoid from mounting bracket.
INSTALLATION
1. Follow the removal procedure in reverse order.
2. Tighten nuts for EGR vacuum regulator solenoid to 5-7 Nm (45-61 lb-in).
