Mustang GT V8-4.6L SOHC VIN X (1998)
NOTE: Hold EGR valve tube to manifold connector with a wrench while tightening EGR valve-to-exhaust manifold tube nut.
4. Lower vehicle.
5. Tighten EGR valve-to-exhaust manifold tube nut to the EGR valve to 35-45 Nm (26-33 lb-ft).
6. Position the accelerator cable bracket. Install and tighten retainers to 8-12 Nm (71-106 lb-in).
7. Connect the accelerator cable and speed control actuator cable to the throttle body.
8. Connect EGR backpressure transducer hoses to the EGR valve to exhaust manifold tube.