Mustang GT V8-4.6L SOHC VIN X (1998)
Pressure Feedback Exhaust Sensor: Service and Repair
REMOVAL
1. Disconnect fuel charging wiring connector from EGR backpressure transducer.
2. Disconnect EGR backpressure transducer hoses from EGR backpressure transducer.
3. Remove EGR backpressure transducer retaining nuts and EGR backpressure transducer from transducer mounting bracket.
4. If necessary, remove the transducer mounting bracket.
INSTALLATION
1. Follow the removal procedure in reverse order.
2. If removed, tighten retainers for the transducer mounting bracket and EGR heat tube shield to 8 - 12 Nm (71 - 106 lb. in.).
Tighten nuts to 5 - 7 Nm (45 - 61 lb. in.).
