ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Idle Speed/Throttle Actuator - Electronic > < Emissions - MIL ON/DTC's Stored/Check Fuel Cap Lamp ON|Page 3942
Page 1
background image

Fuel Tank Mounting Straps: Service and Repair

REMOVAL 

1. Place support under fuel tank.

NOTE:  Either fuel tank support strap may be removed without removing fuel tank if a support is provided under the fuel tank and the opposite
strap is in place.

2. Remove retaining bolt.
3. Push the strap to be removed into the body bracket until the pin aligns with large hole in body bracket.
4. Push the pin through the large hole in the bracket.
5. Remove strap.

INSTALLATION 

1. Follow removal procedure in reverse order.
2. Tighten retaining bolts to 30-40 Nm (22-29 lb-ft).

Idle Speed/Throttle Actuator - Electronic > < Emissions - MIL ON/DTC's Stored/Check Fuel Cap Lamp ON|Page 3942