Mustang GT V8-4.6L SOHC VIN X (1998)
Alarm Module: Service and Repair
Key Programming - Spare Key Programming Switch
NOTE:
^
The Spare Key Programming Switch is a New STAR Generation Tester/Service Bay Diagnostic System (NGS/SBDS) programmable switch
which provides the capability to enable/disable the normal customer Spare Key Programming Procedure detailed in the Owner's Manual (customer
can program a spare ignition key by cycling two programmed ignition keys and then cycling the new key). This programmable switch is provided
as a convenience for rental company fleets or other fleet purchasers who may not want the Spare Key Programming procedure available to the
vehicle driver.
^
The spare key programming switch state can be viewed by PATS PID SPARE__KY.
1. Insert a programmed ignition key into ignition switch and turn ignition switch from OFF to RUN.
2. Enter NGS/SBDS. Follow the Security Access Procedure to obtain security access.
3. From NGS/SBDS menu: Toggle SPARE KEY PROGRAMMING SWITCH selection to desired setting:
<ENABLE> Spare Key Programming Procedure is accessible.
<DISABLE> Spare Key Programming Procedure is not accessible.
NOTE: The default setting on delivery of all new vehicles is <ENABLE>.
