Mustang GT V8-4.6L SOHC VIN X (1998)
4. Repeat Steps 1, 2 and 3 to complete the removal of the twist at the lower (wider and larger) slot in the tongue.
5. Safety belt tongue should face inward when completed.
Seat Belt With Anchor Plate Thread Damage
NOTE: The seat and shoulder safety belts are factory-installed in their proper locations. If the belts are removed for any reason, they should be installed.
The 7/16 x 20 safety seat belt Torx (R) head anchor bolts should be hand started and then tightened to 34-46 N.m (25-33 Lb-Ft).
1. Remove the broken or stripped bolt and discard.
2. Drill out the internal threads in the safety belt anchor plate with a 27/64-inch drill.
3. Rethread the anchor plate with a 1/2-13 tap.
4. Blow out the chips.
