Mustang GT V8-4.6L SOHC VIN X (1998)
Wheel Speed Sensor: Service and Repair
Toothed Ring
7.5-Inch Ring Gear
REMOVAL
Special Tool
1. WARNING: DO NOT ALLOW AXLE SHAFT FLANGE TO CONTACT PRESS BED DURING REAR BRAKE ANTI-LOCK
SENSOR INDICATOR REMOVAL.
CAUTION: After removing a rear brake anti-lock sensor indicator, it must be replaced with a new rear brake anti-lock sensor indicator.
Remove axle shaft. Place axle shaft in press and remove and discard rear brake anti-lock sensor indicator.
INSTALLATION
