ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sensors and Switches - Cruise Control > < Radiator Cooling Fan Temperature Sensor / Switch|DOHC|Page 308
Page 1
background image

Temperature Sensor (Gauge): Service and Repair

REMOVAL

1. Partially drain engine cooling system.
2. Disconnect engine control sensor wiring from water temperature indicator sender unit.
3. Remove water temperature indicator sender unit.

INSTALLATION

1. Follow removal procedure in reverse order.
2. Tighten water temperature indicator sender unit to 12-16 Nm (9-11 ft. lbs.).

Sensors and Switches - Cruise Control > < Radiator Cooling Fan Temperature Sensor / Switch|DOHC|Page 308