Mustang GT V8-4.6L SOHC VIN X (1998)
4. Reinstall battery heat shield.
5. Secure cables (positive first) to proper terminals.Tighten to 6-10 N.m (54-88 lb-in). Apply a small quantity of Premium Long-Life Grease XG-1-C
or XG-1-K or equivalent meeting Ford specification ESA-M1C75-B to terminals.
Battery Tray
REMOVAL
1. Remove battery from vehicle.
2. Remove retaining bolts, screws and washers from battery tray.
3. Remove battery tray from vehicle.
INSTALLATION
1. Position battery tray to front fender apron in engine compartment.
2. Install retaining bolts, screws and washers. Tighten each to 8-12 N.m (71-106 lb-in).
3. Install battery.
