Mustang GT V8-4.6L SOHC VIN X (1998)
4. Unscrew the tube nut and inspect the plastic seal washer. Replace if required. To facilitate assembly of the new Teflon seal, a tapered shaft such as
Teflon Seal Replacer 211-D027 or equivalent may be required to stretch the washer, so it may be slipped over the tube nut threads.
5. Connect the tube nuts and tighten to 27-34 Nm (20-25 ft. lbs.). Install clip to retain the power steering pressure hose and power steering return
hose to the power steering right turn pressure hose.
