Mustang GT V8-4.6L SOHC VIN X (1998)
Control Arm Bushing: Service and Repair
REMOVAL
1. Remove rear suspension arm and bushing.
2. Place Bushing Remover 204-035, Forcing Screw 204-031 and Receiving Cup 204-034 in position and remove the rear suspension arm bushing
assembly.
INSTALLATION
1. Using the Bushing Replacer 204-033, Forcing Screw 204-031 and Receiving Cup 204-032 install the bushing assembly into the rear suspension
arm bushing ear of the rear axle housing.
2. Install rear suspension arm and bushing.