Mustang GT V8-4.6L SOHC VIN X (1998)
Stabilizer Link: Service and Repair
REMOVAL
1. Raise vehicle on a hoist, supporting vehicle by the frame.
2. Remove nut/washer assembly and lower suspension arm stabilizer bar insulator from the ends of the stabilizer bar retaining stud and washer
assembly.
3. Remove bolt/washer assembly and the remaining lower suspension arm stabilizer bar insulators.
INSTALLATION
1. To install lower suspension arm stabilizer bar insulators, reverse Removal procedure.
2. Tighten retaining nuts to 16-22 Nm (11-16 ft. lbs.).
3. Lower vehicle.
