Mustang GT V8-4.6L SOHC VIN X (1998)
Wheel Cover: Service and Repair
Hub Caps
REMOVAL AND INSTALLATION
CAUTION: Wheel covers are held in position with nut caps. Do not pry under the edge of wheel cover. Prying can damage or crack the wheel cover.
Do not use an impact gun to remove decorative caps.
1. Remove decorative caps using a 3/16-inch socket.
2. To install the wheel cover, push the caps into position by hand and tighten until a clicking sound is heard. Tighten the caps an additional 1 to 2
turns.
