Mustang GT V8-4.6L SOHC VIN X (1998)
Pressure Regulating Solenoid: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Raise vehicle on a hoist.
3. Drain transmission fluid.
4. Remove 14 pan retaining bolts, transmission pan and pan to case gasket.
5. Remove pan magnet. Clean transmission pan and pan magnet.
6. CAUTION: If installing a new filter, and grommet remains in the main control bore, carefully use a small screwdriver to remove the grommet.
Use care not to damage the main control bore.
