Mustang GT V8-4.6L SOHC VIN X (1998)
1. After removing direct clutch hub, remove No. 7 direct clutch inner bearing and direct clutch inner bearing support.
2. Remove clutch pressure plate retainer snap ring. Remove and inspect clutch pack. Note the relation of clutch pressure plates for assembly.
3. Using Clutch Spring Compressor 307-015 (T65L-77515-A) compress the direct clutch support and spring. Remove piston retaining ring using
expanding-type snap-ring pliers.
4. NOTE: Use air pressure if necessary to remove clutch piston.
Remove direct clutch support and spring and clutch piston from direct clutch cylinder.