Mustang GT V8-4.6L SOHC VIN X (1998)
5. Remove direct clutch inner seal from direct clutch and outer seal from clutch piston. Verify presence of check ball and that it moves freely.
ASSEMBLY
1. NOTE: Lubricate direct clutch inner seal and seal protector with petroleum jelly.
Install direct clutch inner seal on direct clutch as follows:
a. Position Direct Clutch Inner Lip Seal Protector 307-080 (T80L-77234-A) over direct clutch cylinder.
b. Position direct clutch inner seal over protector tool with the sealing lip facing down.
2. NOTE: Coat direct clutch inner seal and outer piston seals, clutch cylinder sealing area and piston inner sealing area with petroleum jelly.
Install clutch piston outer seal. Note direction of sealing lip before installation. The lip should point toward bottom of clutch cylinder.
