Mustang GT V8-4.6L SOHC VIN X (1998)
5. Install clutch pack and clutch pressure plate.
6. NOTE: Dial Indicator with Bracketry, 100-002 (TOOL-4201-C) or equivalent may also be used for clearance check.
With clutch pressure plate retainer snap ring installed, check clearance between clutch pressure plate retainer snap ring and clutch pressure plate
using a feeler gauge.
Clutch pressure plate should be held downward as the clearance is checked.
7. The clearance should be:
If the clearance is not within limits, install the correct size retaining ring and check the clearance. Selective retaining rings are available in the
following thicknesses:
