Mustang GT V8-4.6L SOHC VIN X (1998)
2. Install clutch piston as follows:
a. Install Forward Clutch Lip Seal Protector (inner) 307-078 (T80L-77140-A) over clutch cylinder hub.
b. Install clutch piston in Forward Clutch Lip Seal Protector 307-SO18 (T68P-7D158-A).
3. Position seal protector and clutch piston in forward clutch cylinder and shaft. Push clutch piston to the bottom of the forward clutch cylinder and
shaft using even thumb pressure. Remove seal protectors.
4. Install piston return spring and clutch piston spring retainer.
5. Compress piston return spring using Direct Clutch Spring Compressor 307-096 (T81P-70235-A). Compress clutch piston only enough to allow
clearance to install snap ring.