Mustang GT V8-4.6L SOHC VIN X (1998)
1. Install the front pump seal using Front Pump Seal Replacer 307-014 (T63L-77837-A).
2. Install new intermediate clutch piston inner seal and intermediate clutch piston outer seal on intermediate clutch piston.
3. CAUTION: The piston bleed hole must be located at 12 o'clock position (toward top of transmission). If incorrectly installed, transmission may
not operate properly.
NOTE: Piston bleed hole is the only round hole in the intermediate clutch piston assembly.
Note location of the piston bleed hole.