Mustang GT V8-4.6L SOHC VIN X (1998)
8. Insert Digital Transmission Range (TR) Sensor Alignment Tool 307-351 (T97L-7001O-A) into slots. Align all three slots on TR sensor with three
tabs on tool.
9. Tighten digital TR sensor bolts to 7-10 Nm (62-88 inch lbs.).
10. NOTE: Transmission oil pan to case gasket is reusable if not damaged.
Clean, inspect and install pan to case gasket and transmission pan. Tighten all bolts to 12-15 Nm (107-132 inch lbs.).
11. Install transmission linkage to manual control lever.
12. Pour 4.7 liters (5 quarts) of MERCON V Automatic Transmission Fluid XT-5-QM or equivalent MERCON V approved fluid into fluid filler tube.
13. Reconnect battery ground cable.
14. Start the engine and add specified fluid as required to achieve the proper fluid level.
15. Check the transmission for leaks.