Mustang GT V8-4.6L SOHC VIN X (1998)
Torque Converter: Service and Repair
Flushing
Special Tools
NOTE: When the transmission has been repaired for internal damage the torque converter must be cleaned using a mechanically agitated cleaner.
1. Use Torque Converter/Oil Cooler Cleaner to clean and flush the torque converter.
2. After flushing, drain the remainder of the solvent through the converter access plug.
3. Add 1.9 liter (2 qt.) of clean transmission fluid to the converter and agitate by hand.
4. Thoroughly drain the solution through the converter access plug.
