Mustang GT V8-4.6L SOHC VIN X (1998)
6. Remove air hose, and release air pressure from tool by pulling on release valve ring.
One-Way Clutch Check
Special Tools
1. Insert the Converter Clutch Holding Tool 307-067 (T77L-7902-R) in one of the grooves in the stator thrust washer.
2. Insert the Converter Clutch Torquing Tool 307-062 (T76L-7902-C) in converter pump drive hub to engage one-way clutch inner race.
3. Attach a torque wrench to the converter clutch torquing tool. With the converter clutch holding tool held stationary, turn the torque wrench
counterclockwise. The torque converter one-way clutch should lock up and hold a 13 Nm (10 ft. lbs.) force. The torque converter one-way clutch
should rotate freely in a clockwise direction until torquing tool contacts the holding tool. Try the clutch for lock up and hold in at least five
different locations around the torque converter.
