Mustang GT V8-4.6L SOHC VIN X (1998)
5. Tighten the 25 main control-to-case valve body bolts to 9-11 Nm (80-97 inch lbs.).
6. Install the molded lead frame to the sensors.
7. Connect the molded lead frame to the sensors.
^
Connect the bulkhead inter connector.
^
Connect the electronic pressure control (EPC) solenoid.
^
Connect the Torque Converter Clutch (TCC).
^
Connect the shift solenoid SSA/SS1 and SSB/SS2.
