Mustang GT V8-4.6L SOHC VIN X (1998)
8. Install filter and grommet.
9. Install pan magnet to transmission pan.
10. NOTE: Transmission oil pan to case gasket is reusable if not damaged.
Clean, inspect and install pan-to-case gasket and transmission pan. Tighten all bolts to 12-15 Nm (107-132 inch lbs.).
11. Lower vehicle.
12. Pour 4.7 liters (5 quarts) of MERCON, Automatic Transmission Fluid XT-5-QM or equivalent Mercon V approved fluid into fluid filler tube.
13. Reconnect battery ground cable.
14. Start the engine and add specified fluid as required to achieve the proper fluid level.
15. Check the transmission for leaks.