Mustang GT V8-4.6L SOHC VIN X (1998)
7. Remove eleven valve body cover plate bolts and two guide pin bolts.
8. Remove main control cover.
ASSEMBLY
1. Install main control cover.
2. Install two guide pin bolts and eleven valve body cover retaining bolts. Tighten guide pin bolts to 9-11 Nm (80-97 inch lbs.) and valve body cover
retaining bolts to 9-11 Nm (80-97 inch lbs.) in sequence shown.
3. Install coasting booster valve shuttle balls, converter drain back valve and solenoid screen.
