Mustang GT V8-4.6L SOHC VIN X (1998)
1. Install the rear wheel bearing into the rear axle housing bore using Axle Tube Bearing Replacer 205-124 (T78P-1225-A).
2. CAUTION: Installation of rear wheel bearing or inner wheel bearing oil seal assembly without proper tool may result in an early rear wheel
bearing or inner wheel bearing oil seal failure. If inner wheel bearing oil seal becomes cocked in bore during installation, remove it and install a
new one.
Install inner wheel bearing oil seal using Axle Tube Seal Replacer 205-123 (T78P-1177-A). Apply Premium Long-Life Grease XG-1-C or X or
equivalent meeting Ford specification ESA-M1C75-B between the lips of the inner wheel bearing oil seal.
3. Make sure rear axle housing vent is no plugged with debris.
