Mustang GT V8-4.6L SOHC VIN X (1998)
Flex Plate: Service and Repair
REMOVAL
1. Remove transmission.
2. If equipped with manual transmission, remove the clutch pressure plate and clutch disc.
3. Remove six bolts retaining flywheel to crankshaft and remove flywheel.
INSTALLATION
1. Position flywheel on crankshaft and install six retaining bolts. Tighten in alternating sequence to 73-87 Nm (54-64 ft. lbs.).
2. Check flywheel runout, if necessary.
3. If equipped, install clutch pressure plate and clutch disc.
4. Install transmission.
