Mustang GT V8-4.6L SOHC VIN X (1998)
Output Shaft: Service and Repair
Output Shaft Seal
Special Tools
REMOVAL
1. Remove driveshaft.
2. Remove oil seal from extension housing with Impact Slide Hammer 100-001 (T50T-100-A) and Seal Remover 307-001 (TOOL-1175-AG) or
equivalent.
INSTALLATION
1. Using Output Shaft Seal Replacer 308-246 (T96P-7127-A), install a new oil seal.
2. Install driveshaft.