Mustang GT V8-4.6L SOHC VIN X (1998)
Windshield Washer Pump: Service and Repair
Front Washer Pump and Reservoir
REMOVAL AND INSTALLATION
1. Remove LH inner front fender splash shield.
2. Disconnect electrical connector from windshield washer reservoir.
3. Remove screw retaining windshield washer reservoir to inner front fender.
4. Disconnect windshield washer hose from windshield washer reservoir.
5. To install, reverse Removal procedure. Fill the windshield washer reservoir and operate system to check for leaks.
