Mustang GT V8-4.6L SOHC VIN X (1998)
Windshield Washer Spray Nozzle: Service and Repair
REMOVAL and INSTALLATION
1. Remove RH and LH windshield wiper pivot arms.
NOTE: A windshield washer nozzle jet is mounted on each side of the cowl top vent grille.
2. Remove the cowl top vent grille. Raise the cowl top vent grille and disconnect the windshield washer hose from each windshield washer nozzle jet.
3. Remove windshield washer nozzle jet by depressing retaining clips.
4. To install, reverse Removal procedure.
