Probe L4-133 2.2L SOHC (1990)
Accumulator HVAC: Service and Repair
1.
Discharge refrigerant from system.
2.
Remove charcoal canister.
3.
Disconnect accumulator/dryer suction line at bulkhead, then remove compressor suction line from accumulator/dryer. Cap suction and evaporator
core outlet lines.
4.
Remove clutch cycling pressure switch electrical connector, then the two mounting bolts from accumulator/drier mounting bracket, and carefully
remove accumulator/drier from vehicle.
5.
Reverse procedure to install. Use new O-ring lubricated with refrigerant oil.
6.
Leak test, evacuate and charge system.
