Probe L4-133 2.2L SOHC Turbo (1989)
5.
Reinstall the ABS relay box, if equipped.
NOTE:
THE HYDRAULIC FLUID LEVEL IN THE RESERVOIR MUST BE MAINTAINED AT THE 3/4 FULL LEVEL OR HIGHER DURING
THE BLEEDING PROCEDURE.
FIGURE 3
6.
Remove the bleeder cap from the slave cylinder, Figure 3.
7.
Attach a vinyl hose to the bleeder screw, Figure 3.
8.
Place the other end of the vinyl hose into a container.
9.
Slowly pump the clutch pedal several times.
10.
With the clutch pedal in the fully depressed position, loosen the bleeder screw to release the fluid and air.
11.
Tighten the bleeder screw.
12.
Repeat Steps 9 through 11 until all the air bubbles are gone from the hydraulic fluid.
13.
Remove the vinyl hose from the bleeder screw and container.
14.
Reinstall the bleeder cap on the slave cylinder.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Eligible Under Basic Warranty Coverage
OPERATION DESCRIPTION
TIME
890911A
Remove Spring & Valve
0.6 Hr.
DEALER CODING
BASIC PART NO. CONDITION CODE
7A543
53
OASIS CODES:
5200, 5300, 5550
