Probe L4-133 2.2L SOHC Turbo (1989)
Engine Lifting Bracket
7.
Remove the engine lifting bracket mounting bolt from the throttle body.
8.
Remove the coolant line/EGR hose retaining bracket from the throttle body.
Throttle Cable Retaining Brackets
9.
Remove the throttle cable retaining brackets from the intake plenum.
10.
Remove the wire loom bracket and the vacuum pipe mounting bolts from the RH side of the intake plenum.
Intake Plenum
11.
Remove the PCV hose from the intake plenum.
12.
Remove the retaining nut and bolts from the vacuum line assembly bracket at the rear of the intake plenum.
13.
Mark all vacuum lines for ease of reassembly and remove the lines from the intake plenum.
14.
Remove the intake plenum retaining bolts and nuts from the intake manifold.
15.
Remove intake plenum and gasket.
CAUTION: After removing the intake plenum, cover the intake manifold ports with a clean cloth to prevent dust and dirt from entering.
INSTALLATION
