Probe V6-153 2.5L DOHC (1994)
7.
Install the bottom edge of the rain shield through the speaker hole in the door. Temporarily hold the rain shield by sticking plastic tape to the door,
just above the speaker opening, as shown in Figure 2.
8.
Replace the old speakers with new units (F32Z-18808-D), installing the two (2) bottom screws first in order to locate the top screw hole.
9.
Remove and discard the plastic tape used to temporarily hold the rain shield.
10.
Reinstall the door trim panel. Refer to the 1993/94 Probe Service Manual, Section 01-05, for the installation procedure.
PART NUMBER
PART NAME
CLASS
F32Z-18B808-A
Rain Shield (1 Set)
A
F32Z-18808-D
Speaker
B
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION DESCRIPTION
TIME
941106AT
Install Rain Shield On Inner
0.6 Hr.
Doors Around Speaker
(Both Sides)
941106A
Install Rain Shield On Inner
0.4 Hr.
Door Around Speaker (One
Side)
DEALER CODING
BASIC PART NO.
CONDITION CODE
18808
08
OASIS CODES: 207000