Probe V6-153 2.5L DOHC (1994)
5. Turn the brake adjuster screw CLOCKWISE with an Allen wrench to remove the rear disc brake caliper piston from the rear disc brake adjuster
spindle. Remove the rear disc brake caliper piston from the rear disc brake caliper bore.
6. Remove the snap ring.
7. Remove the rear disc brake adjuster spindle.
8. Remove and discard the 0-ring.
9. Remove the brake connecting link.
Remove The Piston Seal
CAUTION: Use a plastic or wooden pick to remove the seal. A metal tool can scratch or nick the seal grove and possibly cause a seal leak.
10. Remove and discard the piston seal from the rear disc brake caliper.
11. Remove the rear wheel brake caliper spring.
12. Mark the relationship between the rear brake operating lever and the shaft. Remove the rear brake operating lever from the shaft.
13. Remove and discard the rear brake operating lever boot.
14. Remove and discard the brake caliper bolt dust boot and the caliper sleeve.
Assembly
Lubricate The Parts Shown
1. Lubricate the parts shown with Disc Brake Caliper Slide Grease D7AZ-19590-A (ESA-M1C172-A) or equivalent or brake fluid DOT-3.
2. Install the new caliper sleeve and brake caliper bolt dust boot.
3. Install a new rear brake operating lever boot.
4. Install the rear brake operating lever. Align the marks made during removal.
