Probe V6-153 2.5L DOHC (1994)
EGR Valve
20. Remove the EGR valve and EGR valve gasket.
INSTALLATION
1. Position the EGR valve and the EGR valve gasket on the engine.
2. Install the EGR valve bolts. tighten the EGR valve bolts to 19-25 Nm (14-18 lb ft).
3. Connect the vacuum hose to the EGR valve.
4. Connect the EGR valve-to-exhaust manifold tube. Tighten the EGR-to-exhaust manifold tube fitting to 57-74 Nm (44-54 lb ft).
5. Install the power steering fluid line clamp. Tighten the power steering line fluid clamp to 8-13 Nm (6-9 lb ft).
6. Connect the EGR valve position sensor electrical connector.
7
Position the exhaust inlet pipes.
8. Install the rear and front exhaust manifold-to-exhaust inlet pipes nuts. Tighten the exhaust manifold-to-exhaust inlet pipes nuts to 37-52 Nm
(27-38 lb ft).
9. Install the three-way catalytic converter-to-exhaust inlet pipe nuts. Tighten the three-way catalytic converter-to-exhaust inlet pipe nuts to 64-89
Nm (47-66 lb ft).
10. Remove the jack supporting the three-way catalytic converter.
Heated Oxygen Sensor Electrical Connector
11. Connect the front O2 sensor electrical connector.
12. Install the right side wheel splashguard bolts.