Probe V6-153 2.5L DOHC (1994)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position Sensor #2
Crankshaft Position Sensor
REMOVAL
1. Disconnect the Crankshaft Position
(CKP2) sensor 2 electrical connector.
2. Remove the CKP2 sensor bolt.
3. Remove the CKP2 sensor bracket bolt.
4. Remove the CKP2 sensor.
INSTALLATION
1. Install the CKP2 sensor.
2. Install the CKP2 sensor bracket bolt.
3. Install the CKP2 sensor bracket bolt. Tighten sensor bracket bolts to
8-10 Nm (71-88 lb in).
4. Connect the CKP2 sensor electrical connector.