Probe V6-153 2.5L DOHC (1994)
Technical Service Bulletin # 98-7-1
Date: 980413
Engine - Hard Start/Stall After Hot Soak
Article No.
98-7-1
04/13/98
^
HARD START - WHEN ENGINE ALLOWED TO HOT
SOAK - DISTRIBUTOR SERVICE - VEHICLES WITH
2.5L ENGINE
^
STALL - AFTER STARTING WHEN ENGINE
ALLOWED TO HOT SOAK - DISTRIBUTOR
SERVICE - VEHICLES WITH 2.5L ENGINE
FORD:
1993-94 PROBE
This TSB article is being republished in its entirety to revise Step 6 of the Installation Procedure.
ISSUE:
A hard start or stall condition may occur on some vehicles after an engine (2.5L) hot soak. This may be due to an open in the distributor stator-coil
circuit.