Probe V6-153 2.5L DOHC (1994)
Seat Belt Buckle: Service and Repair
Rear Seat Belt Buckle
Removal
1. Depress the two clips securing the front of the rear seat cushion and cover to the floor.
2. Route the rear safety belt and buckles through the rear seat cushion and cover.
3. Remove the rear seat cushion and cover.
4. Remove the anchor bolts from the rear safety belt and buckle.
5. Remove the rear safety belt and buckle.
Installation
To install, reverse the removal procedure. Tighten the anchor bolts to 38-78 Nm (28-58 lb-ft).