Probe V6-153 2.5L DOHC (1994)
Impact Sensor: Service and Repair
Center Air Bag Sensor and Bracket
Removal
WARNING: THE BACKUP POWER SUPPLY ENERGY MUST BE DEPLETED BEFORE ANY AIR BAG COMPONENT SERVICE IS
PERFORMED. TO DEPLETE THE BACKUP POWER SUPPLY ENERGY, DISCONNECT THE BATTERY GROUND CABLE AND
WAIT ONE MINUTE.
1. Disconnect the battery ground cable and wait one minute for the backup power supply energy to be depleted.
2. Remove the five air deflector screws.
3. Remove the air deflector covering the center air bag sensor and bracket.
4. Remove the two center air bag sensor bolts.
5. Disconnect the center air bag sensor electrical connector as follows:
-
press the orange knob and disconnect the orange connector.
