Probe V6-182 3.0L (1990)
Figure 2
4.
Add polyethylene grease (D7AZ-19584-AA) into the drilled hole, Figure 2. Using the spray extension nozzle on the can, fill the hinge body cavity
until the lubricant seeps out each end of the hinge.
5.
Wipe any excess lubricant from the hinge/liftgate area, then open and close the liftgate several times to work the lubricant into the hinge pin area.
6.
Road test the vehicle to confirm that the noise is eliminated.
PART NUMBER
PART NAME
CLASS
D7AZ-19584-AA
Polyethylene Grease
B
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under Basic Warranty Coverage
OPERATION
DESCRIPTION
TIME
911802A
Modify Hinges And Road
0.7 Hr.
Test
DEALER CODING
BASIC PART NO. CONDITION CODE
7042900
56
OASIS CODES:
111000, 112000, 702000