Probe V6-182 3.0L (1990)
1.
Install secondary piston assembly into bore, spring end first.
2.
Install primary piston assembly, spring end first.
3.
Depress primary piston and install snap ring.
4.
On front wheel drive models, install fluid control valve and torque to 97-115 inch lbs.
5.
Lubricate new grommet with brake fluid and install in primary port.
6.
Install reservoir in new grommet.
7.
On all models, fill and bench bleed master cylinder. Refer to Brake Bleeding.
8.
Install cap and diaphragm on master cylinder reservoir.
