Probe V6-182 3.0L (1990)
5.
Check the A/C system for any interference or vibration causing factors.
Figure 2
a.
Make sure the air conditioning pipe from the compressor to the condenser is not interfering with the radiator, Figure 2. If necessary reposition
the A/C pipe to attain enough clearance between the A/C pipe and radiator.
b.
Make sure the cooling fan is not contributing to the idle vibration.
^
Turn the A/C system on.
^
Confirm that the compressor clutch and cooling fan are operating.
^
Inspect the cooling fan mounts for proper position and bolt torque.
6.
Adjust the hood lock if a "rattling" noise comes from the hood. Refer to the 1989 Probe Shop Manual, page 44-08-01 for service details.
Figure 3
7.
Replace the Number 1 & 2 engine mounts with new ones, Figure 3.
