ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - Oil Leaks From Rear Of Engine|Page 1759 > < Engine - Oil Leaks From Rear Of Engine|Page 1753
Page 1
background image

Expansion/Freeze Plug: All Technical Service Bulletins
Engine - Oil Leaks From Rear Of Engine

Article No. 
91-7-8

04/05/91

LEAKS - OIL - 3.0L - CAMSHAFT CORE PLUG

FORD:

1986-91 TAURUS 1990-91 PROBE

LINCOLN-MERCURY: 1986-91 SABLE

LIGHT TRUCK:

1986-91 AEROSTAR 1991 RANGER

ISSUE:

Oil leaking at the rear of the engine may be coming from the rear camshaft core (welsh) plug. Oil leaks in this area are sometimes mistakenly
identified as coming from the rear crankshaft seal.

ACTION:

Check for a leaking rear camshaft core plug. If necessary, install a new camshaft core plug. Refer to the following procedure for service
details.

Before installing a camshaft core plug, inspect the plug bore for any damage that would interfere with proper sealing of the plug. If the bore is damaged,
it will be necessary to true the surface by boring for the next oversize plug. Oversize plugs are identified by the "OS" stamped in the flat located on the
side of the plug.

Figure 1

1. Install the camshaft core plug (F1DZ-6266-A), Figure 1.

a. Use a suitable driver.

b. Apply a light coating of anaerobic sealer (E1FZ-19562-A) on the sealing edge of the plug before installation.

2. Install the flywheel. Tighten the bolts to 59 lb.ft. (80 N-m).

PART NUMBER

PART NAME

CLASS

E1FZ-19562-A

Anaerobic Sealer

AM

F1DZ-6266-A

Camshaft Core Plug

B

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Eligible Under Basic Warranty Coverage, Powertrain Warranty Coverage
OPERATION DESCRIPTION

TIME

910708A

Replace Camshaft Core

3.1 Hr

Plug - Aerostar/Ranger - Automatic Transmission

910708A

Replace Camshaft Core

3.0 Hr

Plug - Aerostar/Ranger - Manual Transmission

910708A

Replace Camshaft Core

4.1 Hr.

Engine - Oil Leaks From Rear Of Engine|Page 1759 > < Engine - Oil Leaks From Rear Of Engine|Page 1753