Probe V6-182 3.0L (1990)
6.
Disconnect electrical connections to ACT, ISC and Throttle Position Sensors.
7.
Remove the MAP Sensor from the throttle body.
8.
Disconnect throttle cable and TV cable from throttle lever.
Throttle Body Assembly
9.
Remove the fuel rail bolt from the throttle body.
10.
Loosen and remove six throttle body retaining bolts.
11.
Lift and remove throttle body assembly from intake manifold.
INSTALLATION
Intake Plenum Removal/Installation
NOTE: Lightly oil all bolt and stud threads prior to installation.